Picking the right model aircraft is important and there are so many great trainers available that choosing one can be difficult. So let’s look at the selection of trainer aircraft.

If you are trying to choose a trainer model, you may wonder about what the differences are and which size to purchase.

Is it easier to select a trainer model that just requires three channels to operate? Are four channels better? This brief introduction might help you decide.

There are fun ways to learn using the left stick that are effective and quick. We are going to entice you into learning rudder and throttle control by offering several easy, fun practice maneuvers and then finishing with the attractive aerobatic performance known as a stall turn.

When preparing for take-off for the first flight of your model, it is important to make sure that everything on your plane is in place so you will have a safe flight. This article explains tasks that need to be completed before your model flies for the first time. Since there are many tasks to complete, a maiden flight checklist is included in the article, so it will be easier to remember all the tasks that need to be completed in order for your first flight to go smoothly.

In regards to remote control (RC) airplanes, there are two types to choose from: almost ready-to-fly (ARF) or ready-to-fly (RTF) models. In this article, we will discuss the types of airframes that are available for these types of models and which are best for learning the basics of RC flight. We will also explain how to modify airframes of ARF and RTF aircraft to improve performance and durability.

When trimming one's airplane, it is extremely important to correctly set up the right thrust, so it will be ready for takeoff. The attitude adjustment is also a factor that is important for takeoff. This article explains several problems that can arise when trimming your plane, as well as solutions to help your plane fly safely.

Trimming for directional controllability allows for the model to not be cross-trimmed and to fly straight at all speeds. It also causes the plane to achieve predictable aileron response at these speeds. Atfer trimming is completed, your model will have balanced wings that will allow your plane to fly straight!

Aileron hinge-line leakage can cause many problems when flying a model. It causes loss of lift, adverse yaw and hampers roll control. This article explains how to seal the hinge gaps to prevent these issues.

This group project uses model aviation as a tool to inspire creativity and demonstrate the processes by which ideas become reality. It teaches the fundamentals of aerodynamics, aircraft design, construction and basic RC power/control systems. You will need the assistance of someone who is familiar with building model aircraft.


Subscribe to RSS - flight dynamics