Suitable for adults

Charles Eide explains how to capture great aerial shots while flying your model aircraft. He also explains the importance of investing in quality equipment, flying line of sight, timing your flights and monitoring voltage, finding a helper, choosing a platform to fly on, framing your shot and investing in a good camera.

Although indoor glider events are simple, they are sometimes hard to master. Weight, strength, and aerodynamics are three issues that are very important when flying an indoor glider. Kurt Krempetz for AMA Glider will discuss these issues in this article.

Learning how to launch handles for catapult gliders is essential when flying a glider. Kurt Krempetz of AMA Glider discusses the AMA rules for launching handles for catapult gliders in both indoor and outdoor events are discussed.

Kurt Krempetz of AMA Glider explains why it is important to trim a glider, so that it will be able to make turns while flying, rather than just flying straight. He also discusses the various forces of a glider, such as the lift force and gravity, and the pitch axis.

Sandpaper is a material that is almost always used when building a glider. The process of using sandpaper to remove material is called sanding. In this article, Kurt Krempetz of AMA Glider explains techniques for sanding a glider.

MAKE Magazine and AMA youth member Lucas Weakley have teamed up to bring you Maker Hangar, a 15-episode tutorial series that will teach you everything you need to know to build and fly this custom RC plane, the Maker Trainer.

The Sky Streak is a balsa motorplane that can be easily assembled by just about anyone and can be flown either indoors or outside. Although the stock Sky Streak flies well, there are some special modifications you can make to really enhance flight performance.

Have you ever gotten a hole in one of the wings of your model aircraft? In this article, we will demonstrate a few easy steps to help you patch the hole in your wing successfully.

When trimming one's airplane, it is extremely important to correctly set up the right thrust, so it will be ready for takeoff. The attitude adjustment is also a factor that is important for takeoff. This article explains several problems that can arise when trimming your plane, as well as solutions to help your plane fly safely.

Trimming for directional controllability allows for the model to not be cross-trimmed and to fly straight at all speeds. It also causes the plane to achieve predictable aileron response at these speeds. Atfer trimming is completed, your model will have balanced wings that will allow your plane to fly straight!

Pages

Subscribe to RSS - Adult